> ElectricalDesign > Reference Libraries > Curves > Characteristics

Characteristics

Keywords
Abstract

Adding protective devices

In order for the curves chart to be drawn, protective devices from the library must be added to the project's list of devices.

The library on the left contains devices organized into categories. To add a device to the project:

  • Drag-drop the device into the project's list of devices OR
  • Double-click on a device OR
  • Right-click on the device and select Add to project OR
  • Select-click a device on the library tree and then on the ribbon click Add

The chart on the right is redrawn to include the added device's curve.

Remove a device

To remove a device from the project's list:

  • Right-click on the device and select Remove OR
  • On the ribbon click Remove

Edit the curve's color and line type

To change the curve's color, pen width and line type:

  1. In the project's device list, click the line preview image OR on the ribbon click Edit
  2. Select the color, pen width and line type and click OK

The chart is redrawn to reflect the changes.

Adding marks

To add a mark on the chart:

  1. Right-click in the chart and select Add Mark OR press Ctrl + M
  2. Click on a point in the chart

Adding short-circuit lines

To add a short-circuit line on the chart:

  1. Right-click in the chart and select Add short-circuit line OR press Ctrl + L
  2. Click on a point in the chart

TiSoft,